ZhongHeng Machine Manufacture Co.,Ltd
ZHONGHENG MACHINE MANUFACTURE CO.,Ltd Better Design , Better Quality Based on China,Serve Global
Add to Cart
Two line Stud and track Omega profile roll forming machine with servo motor control
Light steel keel molding machine is used to plaster board, gypsum board and other decorative finishes lightweight board made of non-load-bearing walls and roof of the building style decoration,
a variety of decorative building roof shape, inside and outside the building wall and ceiling scaffolding base material. Used in hotels, terminals, bus terminal, railway stations, theaters, shopping malls,
factories, office buildings, old building renovation, interior decoration settings, roof and other places.
Specifications
| 1. | Power requirement
| Type | 380v/3ph/50hz | |
| Main Motor power | 4kw+4kw | |||
| Cutter power | Double 4kw with servo motor | |||
| 2. | Forming speed(m/min) | 40-45m/min max | Not include the time of cutting | |
| 3. | Forming stations | 11stations | ||
| 5. | Material of rollers | CR12 | ||
| 6. | Thickness of structure | 30mm | ||
| 7 | Forming shaft diameter(mm) | 40 | ||
| 8 | Drive | Gear | ||
| 9 | Type of cutting | Hydraulic cutting | ||
| 10. | Control system | PLC taida | ||
| 11. | Install dimension(depend on the final design) | 3.8m×0.6m×1.2m | Without panel length | |
| 12. | Total weight (Approx) | 2.3T | Depend on final design | |
| 13. | Screen | Text screen /touch screen | ||
Machine pictures
Components of line
1.Man-made decoiler
2.Feeding Table
3.Forming Rollers
4.cutting system
5.Hydraulic system
6.Control system
7.Run out table
Machine loading